Datasheet
R01DS0041EJ0150 Rev.1.50 Page 98 of 221
Oct 18, 2013
RX210 Group 5. Electrical Characteristics
[Chip version C]
Table 5.10 DC Characteristics (9)
Conditions: VCC = AVCC0 = 1.62 to 5.5 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when internal pull-up MOSs
are in the off state.
Note 2. Clock supply to the peripheral functions is stopped. This does not include BGO operation. The clock source is PLL and the VCO
oscillation frequency is 64 MHz. BCLK, FCLK, and PCLK are set to divided by 64.
Note 3. Clock supply to the peripheral functions is stopped. This does not include BGO operation. The clock source is HOCO and the
oscillation frequency is 40 MHz. BCLK, FCLK, and PCLK are set to divided by 64.
Note 4. Clocks are supplied to the peripheral functions. This does not include BGO operation. The clock source is PLL and the VCO
oscillation frequency is 64 MHz. BCLK, FCLK, and PCLK are ICLK divided by 1.
Item Symbol Typ. Max. Unit
Test
Conditions
Supply
current*
1
Middle-speed
operating modes
1A and 1B
Normal
operating mode
No peripheral
operation
ICLK = 32 MHz*
2
I
CC
7.0 — mA
ICLK = 20 MHz*
3
6.0 —
All peripheral
operation:
Normal
ICLK = 32 MHz*
4
26 —
ICLK = 20 MHz*
5
18.5 —
All peripheral
operation: Max.
ICLK = 32 MHz*
4
—40
ICLK = 20 MHz*
5
—30
Sleep mode No peripheral
operation
ICLK = 32 MHz 5.0 —
ICLK = 20 MHz 4.6 —
All peripheral
operation:
Normal
ICLK = 32 MHz 15.5 —
ICLK = 20 MHz 12 —
All-module clock stop mode ICLK = 32 MHz 4.5 —
ICLK = 20 MHz 4.5 —
Increase during
BGO operation*
6
Middle-speed operating mode 1A 25 —
Middle-speed operating mode 1B 20 —
Low-speed
operating mode
1
Normal
operating mode
No peripheral
operation*
7
ICLK = 1 MHz 0.68 —
All peripheral
operation:
Normal*
8
ICLK = 1 MHz 2.4 —
All peripheral
operation: Max. *
8
ICLK = 1 MHz — 7
Sleep mode No peripheral
operation
ICLK = 1 MHz 0.6 —
All peripheral
operation:
Normal
ICLK = 1 MHz 2 —
All-module clock stop mode 0.58 —
Low-speed
operating mode
2
Normal
operating mode
No peripheral
operation*
9
ICLK = 32 kHz 0.024 —
All peripheral
operation:
Normal*
10
ICLK = 32 kHz 0.05 —
All peripheral
operation: Max.
*
10
ICLK = 32 kHz — 3*
11
Sleep mode No peripheral
operation
ICLK = 32 kHz 0.02 —
All peripheral
operation:
Normal
ICLK = 32 kHz 0.04 —
All-module clock stop mode 0.018 —