Datasheet
R01DS0041EJ0150 Rev.1.50 Page 89 of 221
Oct 18, 2013
RX210 Group 5. Electrical Characteristics
[Chip version A]
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when internal pull-up MOSs
are in the off state.
Note 2. Clock supply to the peripheral functions is stopped. This does not include BGO operation. The clock source is PLL and the VCO
oscillation frequency is 100 MHz. BCLK, FCLK, and PCLK are set to divided by 64.
Note 3. Clocks are supplied to the peripheral functions. This does not include BGO operation. The clock source is PLL and the VCO
oscillation frequency is 100 MHz. BCLK, FCLK, and PCLK are ICLK divided by 2.
Note 4. This is the increase if data is programmed to or erasing from the ROM or E2 DataFlash during program execution.
Table 5.4 DC Characteristics (3)
Conditions: VCC = AVCC0 = 1.62 to 5.5 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol Min. Typ. Max. Unit Test Conditions
Input leakage
current
RES#, MD pin, P35/NMI
I
in
——1.0µAV
in
= 0 V, VCC
Three-state
leakage current
(off-state)
Port 4
I
TSI
——1.0µAV
in
= 0 V, VCC
Other pins except for ports for 5 V
tolerant and port 4
——0.2
Ports for 5 V tolerant — — 1.0 V
in
= 0 V, 5.8 V
Input capacitance All input pins
(except for ports 12, 13, 16, 17, 4, A1,
A3, A4, and E)
C
in
— — 15 pF V
in
= 0 V,
f = 1 MHz,
T
a
= 25°C
Ports 12, 13, 16, 17, 4, A1, A3, A4, and E — — 30
Table 5.5 DC Characteristics (4)
Conditions: VCC = AVCC0 = 1.62 to 5.5 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol
VCC
Unit Test Conditions1.62 to 2.7 V 2.7 to 4.0 V 4.0 to 5.5 V
Min. Max. Min. Max. Min. Max.
Input pull-up MOS
current
All ports
(except for port 35)
I
p
–150 –5 –200 –10 –400 –50 µA V
in
= 0 V
Table 5.6 DC Characteristics (5)
Conditions: VCC = AVCC0 = 2.7 to 5.5 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol Typ. Max. Unit
Test
Conditions
Supply
current*
1
High-speed
operating mode
Normal operating
mode
No peripheral
operation*
2
ICLK = 50 MHz I
CC
10 — mA
All peripheral
operation:
Normal*
3
ICLK = 50 MHz 31.5 —
All peripheral
operation:
Max.*
3
ICLK = 50 MHz — 55
Sleep mode No peripheral
operation
ICLK = 50 MHz 7.5 —
All peripheral
operation:
Normal
ICLK = 50 MHz 17.5 —
All-module clock stop mode ICLK = 50 MHz 6.7 —
Increase during BGO operation*
4
25 —