Datasheet

R01DS0041EJ0150 Rev.1.50 Page 137 of 221
Oct 18, 2013
RX210 Group 5. Electrical Characteristics
[Chip versions B and C]
[Chip versions B and C]
5.2.1 Standard I/O Pin Output Characteristics (1)
Figure 5.45 to Figure 5.49 show the characteristics when normal output is selected by the drive capacity control
register.
Figure 5.45 VOH/VOL and IOH/IOL Voltage Characteristics at Ta = 25°C when Normal Output is
Selected (Reference Data)
Table 5.31 Output Values of Voltage (4)
Conditions: VCC = AVCC0 = 2.7 to 4.0 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol Min. Max. Unit Test Conditions
Output low All output pins
(other than RIIC)
Normal output mode V
OL
—0.5VI
OL
= 1.0 mA
High-drive output mode — 0.5 I
OL
= 2.0 mA
RIIC pins — 0.4 I
OL
= 3.0 mA
—0.6 I
OL
= 6.0 mA
Output high All output pins Normal output mode V
OH
VCC – 0.5 — V I
OH
= –1.0 mA
High-drive output mode VCC – 0.5 — I
OH
= –2.0 mA
Table 5.32 Output Values of Voltage (5)
Conditions: VCC = AVCC0 = 4.0 to 5.5 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol Min. Max. Unit Test Conditions
Output low All output pins
(other than RIIC)
Normal output mode V
OL
—0.8VI
OL
= 2.0 mA
High-drive output mode — 0.8 I
OL
= 4.0 mA
RIIC pins — 0.4 I
OL
= 3.0 mA
—0.6 I
OL
= 6.0 mA
Output high All output pins Normal output mode V
OH
VCC – 0.8 — V I
OH
= –2.0 mA
High-drive output mode VCC – 0.8 — I
OH
= –4.0 mA
01 2 3 4 5 6
IOH/IOL vs VOH/VOL
–50
–40
–30
–20
–10
0
10
20
30
40
VOH/VOL [V]
IOH/IOL [mA]
VCC = 5.5 V
VCC = 5.5 V
VCC = 3.3 V
VCC = 2.7 V
VCC = 2.7 V
VCC = 1.62 V
VCC = 1.62 V
VCC = 3.3 V