Datasheet

R01DS0041EJ0150 Rev.1.50 Page 134 of 221
Oct 18, 2013
RX210 Group 5. Electrical Characteristics
Note: • Please contact Renesas Electronics sales office for derating of operation under Ta = +85°C to +105°C. Derating is the
systematic reduction of load for the sake of improved reliability.
Note 1. Total power dissipated by the entire chip (including output currents)
Note: • The values for A/D conversion apply when the sample and hold circuit is not in use.
Note 1. The reference power supply current is included in the power supply current value for D/A conversion.
Note 2. The value is the total value of I
AVCC0
and I
VREFH
.
Table 5.21 DC Characteristics (20)
Conditions: VCC = AVCC0 = 1.62 to 5.5 V, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol Typ. Max. Unit Test Conditions
Permissible total consumption power*
1
Pd — 350 mW Ta = –40 to 85°C
— 150 85°C < Ta ≤ 105°C
Table 5.22 DC Characteristics (21)
Conditions: VCC = AVCC0 = 1.62 to 5.5 V, VREFH = 1.8 to AVCC0, VREFH0 = 1.62 to AVCC0,
VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol Min. Typ. Max. Unit Test Conditions
Analog power
supply current
During A/D conversion I
AVCC0
— 1.0 3.2 mA
Temperature sensor operating, waiting for A/D
conversion
— 60 200 µA
During D/A conversion (per channel)
I
VREFH
*
1
— 0.25 0.75 mA
Waiting for A/D, D/A conversion (all units)*
2
——0.25.0µA
Reference
power supply
current
During A/D conversion I
VREFH0
— 0.1 0.2 mA
Waiting for A/D conversion — 0.2 0.4 µA
Table 5.23 DC Characteristics (22)
Conditions: VCC = AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V, T
a
= –40 to +105°C
Item Symbol Min. Typ. Max. Unit Test Conditions
RAM standby voltage V
RAM
1.62 — — V
Table 5.24 DC Characteristics (23)
Conditions: VCC = AVCC0 = 0 to 5.5 V, VREFH = VREFH0 = 0 to AVCC0, VSS = AVSS0 = VREFL = VREFL0 = 0 V,
T
a
= –40 to +105°C
Item Symbol Min. Typ. Max. Unit Test Conditions
VCC rising gradient SrVCC 0.02 — 20 ms/V At cold start