User manual

 iSYSTEM, September 2014 3/23
2 Emulation Options
2.1 Hardware Options
In-Circuit Emulator Options dialog, Hardware page
There are no user settable options here. The Emulation memory is actually a flash memory inside the
Fx4 Umbrella device on the Renesas POD. There is also no need for the Shadow Memory as the
Real-Time access is supported by the debug interface by default.
2.2 CPU Configuration
Select the emulated CPU family, the POD and the target device being emulated.
CPU Setup
Opens the CPU Setup dialog. In this dialog, parameters like memory mapping, bank switching and
advanced operation options are configured. The dialog will look different for each CPU reflecting the
options available for it.
Set Default
This button will set default options for currently selected CPU. These include:
 Vcc and clock source and frequency
 Advanced CPU specific options
Note: Default options are also set when the Family or a POD is changed.
In-Circuit Emulator Options dialog, CPU Configuration page
2.3 Power Source and Clock
The Vcc/Clock Setup page determines the CPU's power and clock source.