Hardware manual

2.9.1 Power
There is a jumper pin for measuring the current when you use only CPU board itself.
JP5
JP6
CN4 : AC Jack
JP7
No. Select Note
I/O Power (3.3V or 5V)
JP7
Short
Connect ammeter to check the current
Internal Power (1.25V)
JP5
Short
Connect ammeter to check the current
Operation voltage is 5V.
1-2
JP6
Operation voltage is 3.3V.
2-3
(Only when FL-BASE board is connected)
2.9.2 CPU
CPU is direct-mounted for "EB-850/FL4H".
For "EB-850/FL4H-S", only socket is mounted. Make sure the position of 1pin when you mount
CPU.
1pin
- 24 -