User manual

Starter Kit for V850E2/FG4-L User Manual
2.4.1 LEDs
2.4.1.1 White LED (High Brightness)
A RGB white high brightness / high power LED, D1, is provided to allow visual observation of
microcontroller output port state. The LED signal is active high.
LED Device Port
D1 P0_15
Table 6. White LED Signal
The maximum output power of D1 can be limited by jumper CN14:
Jumper Setting Description
1 - 2 Low output power
3 - 4 High output power
(CAUTION)
CN14
open LED disabled
Table 7. CN14 - White LED Power selection
2.4.1.2 Blue LEDs
Four blue LEDs, D2 to D5, are provided to allow visual observation of microcontroller output port
states. The LED signals are active high.
LED Device Port
D2 P1_3
D3 P1_4
D4 P1_5
D5 P1_6
Table 8. Blue LED Signals
2.4.1.3 RGB LED
An RGB (red / green / blue) LED, D6, is provided to allow visual observation of microcontroller
output port states. The LED signals are active high.
LED Device Port
D6_Red P1_14
D6_Green P1_13
D6_Blue P1_12
Table 9. RGB LED Signals
R20UT0939ED0100 Page 11
Mar 8, 2012