Datasheet

User’s Manual U18172EJ3V0UD
316
APPENDIX B NOTES ON DESIGNING TARGET SYSTEM
This chapter shows areas on the target system where component mounting is prohibited and areas where there
are component mounting height restrictions when the QB-78K0SKX1 is used.
For the package drawings of the target connector, exchange adapter, and emulation probe, see the following
website.
http://www.necel.com/micro/en/development/asia/iecube/outline_QB.html
Figure B-1. When using the 78K0S/Kx1+ emulation probe (For 10-Pin MA Package)
: 1pin
Unit
: mm
: Exchange adapter tip area
→ Components up to 3.5 mm high can be mounted.
: Target connector area
: Exchange adapter mounted-component area
→ Components up to 2.0 mm high can be mounted.
Center point of
Target connector
Top view
9.0
7.5
6.4
4.5 5.9
4.1
: 1pin
Unit
: mm
: Exchange adapter tip area
→ Components up to 3.5 mm high can be mounted.
: Target connector area
: Exchange adapter mounted-component area
: Exchange adapter tip area
→ Components up to 3.5 mm high can be mounted.
: Target connector area
: Exchange adapter mounted-component area
→ Components up to 2.0 mm high can be mounted.
Center point of
Target connector
Top view
9.0
7.5
6.4
4.5 5.9
4.1
Center point of
Target connector
Top view
9.0
7.5
6.4
4.5 5.9
4.1
9.0
7.5
6.4
4.5 5.9
4.1
Overview
Viewing direction
EP
EA
TC
IECUBE
Overview
Viewing direction
EP
EA
TC
IECUBE
Note EP: Emulation probe
EA: Exchange adapter
TC: Target connector
<R>