Datasheet
CHAPTER 19 ELECTRICAL SPECIFICATIONS
User’s Manual U18172EJ3V0UD
300
DC Characteristics (4/4)
(2)
μ
PD78F950x (TA = −40 to +85°C, VDD = 2.0 to 5.5 V
Note 1
, VSS = 0 V) (2/2)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
fX = 10 MHz
V
DD = 5.0 V ±10%
Note 4
6.1 12.2 mA
fX = 6 MHz
V
DD = 5.0 V ±10%
Note 4
5.5 11.0 mA
IDD1
Note 3
External clock
input oscillation
operating
mode
Note 6
f
X = 5 MHz
V
DD = 3.0 V ±10%
Note 5
3.0 6.0 mA
When peripheral functions are stopped
1.7 3.8
fX = 10 MHz
V
DD = 5.0 V ±10%
Note 4
When peripheral functions are operating
6.7
mA
When peripheral functions are stopped
1.3 3.0
fX = 6 MHz
V
DD = 5.0 V ±10%
Note 4
When peripheral functions are operating
6.0
mA
When peripheral functions are stopped
0.48 1
IDD2
External clock
input HALT
mode
Note 6
f
X = 5 MHz
V
DD = 3.0 V ±10%
Note 5
When peripheral functions are operating
2.1
mA
IDD3
Note 3
High-speed
internal oscillation
operating
mode
Note 7
f
X = 8 MHz
V
DD = 5.0 V ±10%
Note 4
5.0 10.0 mA
When peripheral functions are stopped
1.4 3.2 IDD4
High-speed
internal oscillation
HALT mode
Note 7
f
X = 8 MHz
V
DD = 5.0 V ±10%
Note 4
When peripheral functions are operating
5.9
mA
When low-speed internal oscillation is
stopped
3.5 20.0VDD = 5.0 V ±10%
When low-speed internal oscillation is
operating
17.5 32.0
μ
A
When low-speed internal oscillation is
stopped
3.5 15.5
Supply
current
Note 2
I
DD5 STOP mode
V
DD = 3.0 V ±10%
When low-speed internal oscillation is
operating
11.0 26.0
μ
A
Notes 1. Use this product in a voltage range of 2.2 to 5.5 V because the detection voltage (VPOC) of the power-on
clear (POC) circuit is 2.1 V ±0.1 V.
2. Total current flowing through the internal power supply (V
DD). However, the current that flows through the
pull-up resistors of ports is not included.
3. I
DD1 and IDD3 include peripheral operation current.
4. When the processor clock control register (PCC) is set to 00H.
5. When the processor clock control register (PCC) is set to 02H.
6. When external clock input is selected as the system clock source using the option byte.
7. When high-speed internal oscillation clock is selected as the system clock source using the option byte.
<R>