Datasheet

User’s Manual U18172EJ3V0UD
294
CHAPTER 19 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (T
A = 25°C)
Parameter Symbol Conditions Ratings Unit
VDD −0.3 to +6.5 V Supply voltage
V
SS −0.3 to +0.3 V
Input voltage VI P20 to P23, P32, P34, P40, P43 −0.3 to VDD + 0.3
Note 1
V
Output voltage VO −0.3 to VDD + 0.3
Note 1
V
Analog input voltage
Note 2
VAN −0.3 to VDD + 0.3
Note 1
V
Per pin −10.0 mA Output current, high IOH
Total of P20 to P23, P32, P40, P43 −44.0 mA
Per pin 20.0 mA Output current, low IOL
Total of P20 to P23, P32, P40, P43 44.0 mA
In normal operation mode
Operating ambient
temperature
T
A
During flash memory programming
−40 to +85 °C
Flash memory blank status −65 to +150 °C Storage temperature Tstg
Flash memory programming already performed −40 to +125 °C
Notes 1. Must be 6.5 V or lower
2. μ PD78F920x only
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.
<R>