Datasheet

78K0/Ix2 APPENDIX C REVISION HISTORY
R01UH0010EJ0500 Rev.5.00 742
Feb 28, 2012
(7/7)
Edition Description Chapter
Addition of (2) When using the TOOLC0 and TOOLD0 pins (with X1/X2 oscillator is
used, both debugging and programming are performed) to Figure 26-1. Connection
Example of QB-MINI2 and 78K0/Ix2 Microcontrollers
CHAPTER 26 ON-CHIP
DEBUG FUNCTION
Addition of description of PLL Characteristics
Addition of Caution to DC Characteristics (2/5)
Change of conditions of comparator operating current of DC Characteristics (5/5)
Addition of description of comparator input high-level width, low-level width to (1) Basic
operation of AC Characteristics
Deletion of min. value of input noise spectral density in (4) Operational amplifier of Analog
Characteristics
Addition of internal reference voltage to (5) Comparator of Analog Characteristics
Deletion of Caution of (6) POC of Analog Characteristics
Change of the frequency of operating voltage range in Flash Memory Programming
Characteristics
CHAPTER 28
ELECTRICAL
SPECIFICATIONS
Addition of 20-PIN PLASTIC SOP (7.62 mm (300)) and 32-PIN PLASTIC WQFN (5 x 5) CHAPTER 29
PACKAGE DRAWINGS
Addition of 20-pin plastic SOP (7.62 mm (300)) and 32-pin plastic WQFN (5 x 5) to Table
30-1. Surface Mounting Type Soldering Conditions
CHAPTER 30
RECOMMENDED
SOLDERING
CONDITIONS
Deletion of "under development" of flash memory write adapter in Figure A-1.
Development Tool Configuration (1/2)
4th Edition
Change of packages of target device and flash memory programming adapter of A.3.1
When using flash memory programmer PG-FP5 and FL-PR5
APPENDIX A
DEVELOPMENT TOOLS