Datasheet

78K0/Ix2 APPENDIX A DEVELOPMENT TOOLS
R01UH0010EJ0500 Rev.5.00 730
Feb 28, 2012
A.4 Debugging Tools (Hardware)
A.4.1 When using in-circuit emulator
QB-78K0IX2
In-circuit emulator
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K0/Ix2 microcontrollers. It supports to the integrated debugger (ID78K0-
QB). This emulator should be used in combination with a power supply unit and emulation probe,
and the USB is used to connect this emulator to the host machine.
A.4.2 When using on-chip debug emulator with programming function QB-MINI2
QB-MINI2
On-chip debug emulator with
programming function
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0/Ix2 microcontrollers. It is available also as flash
memory programmer dedicated to microcontrollers with on-chip flash memory. When
using this as on-chip debug emulator, it should be used in combination with a connection
cable (16-pin cable), a USB interface cable that is used to connect the host machine, and
the 78K0-OCD board.
Target connector specifications
16-pin general-purpose connector (2.54 mm pitch)
Remark Download the software for operating the QB-MINI2 from the download site for development tools
(https://secure-resource.renesas.com/micro/tool_reg/OdsListTop.do?lang=en).
A.5 Debugging Tools (Software)
ID78K0-QB
Integrated debugger
This debugger supports the in-circuit emulators for the 78K0 microcontrollers. The
ID78K0-QB is Windows-based software.
It has improved C-compatible debugging functions and can display the results of tracing
with the source program using an integrating window function that associates the source
program, disassemble display, and memory display with the trace result. It should be
used in combination with the device file (DF780756).
SM+ for 78K0
System simulator
System simulator is Windows-based software.
It is used to perform debugging at the C source level or assembler level while simulating
the operation of the target system on a host machine.
Use of system simulator allows the execution of application logical testing and
performance testing on an independent basis from hardware development, thereby
providing higher development efficiency and software quality.
System simulator should be used in combination with the device file (DF780756).
<R>