Datasheet
78K0/Ix2 CHAPTER 28 ELECTRICAL SPECIFICATIONS
R01UH0010EJ0500 Rev.5.00 714
Feb 28, 2012
Caution The pins mounted depend on the product. Refer to Caution 2 at the beginning of this chapter.
Data Memory STOP Mode Low Supply Voltage Data Retention Characteristics (TA = 40 to +105C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Data retention supply voltage VDDDR 1.50
Note
5.5 V
Note The value depends on the POC detection voltage. When the voltage drops, the data is retained until a POC reset
is effected, but data is not retained when a POC reset is effected.
V
DD
STOP instruction execution
Standby release signal
(interrupt request)
STOP mode
Data retention mode
V
DDDR
Operation mode