Datasheet
78K0/Ix2 CHAPTER 27 INSTRUCTION SET
R01UH0010EJ0500 Rev.5.00 675
Feb 28, 2012
CHAPTER 27 INSTRUCTION SET
This chapter lists each instruction set of the 78K0/Ix2 microcontrollers in table form. For details of each operation and
operation code, refer to the separate document 78K/0 Series Instructions User’s Manual (U12326E).
27.1 Conventions Used in Operation List
27.1.1 Operand identifiers and specification methods
Operands are written in the “Operand” column of each instruction in accordance with the specification method of the
instruction operand identifier (refer to the assembler specifications for details). When there are two or more methods,
select one of them. Uppercase letters and the symbols #, !, $ and [ ] are keywords and must be written as they are. Each
symbol has the following meaning.
#: Immediate data specification
!: Absolute address specification
$: Relative address specification
[ ]: Indirect address specification
In the case of immediate data, describe an appropriate numeric value or a label. When using a label, be sure to write
the #, !, $, and [ ] symbols.
For operand register identifiers r and rp, either function names (X, A, C, etc.) or absolute names (names in parentheses
in the table below, R0, R1, R2, etc.) can be used for specification.
Table 27-1. Operand Identifiers and Specification Methods
Identifier Specification Method
r
rp
sfr
sfrp
X (R0), A (R1), C (R2), B (R3), E (R4), D (R5), L (R6), H (R7)
AX (RP0), BC (RP1), DE (RP2), HL (RP3)
Special function register symbol
Note
Special function register symbol (16-bit manipulatable register even addresses only)
Note
saddr
saddrp
FE20H to FF1FH Immediate data or labels
FE20H to FF1FH Immediate data or labels (even address only)
addr16
addr11
addr5
0000H to FFFFH Immediate data or labels
(Only even addresses for 16-bit data transfer instructions)
0800H to 0FFFH Immediate data or labels
0040H to 007FH Immediate data or labels (even address only)
word
byte
bit
16-bit immediate data or label
8-bit immediate data or label
3-bit immediate data or label
RBn RB0 to RB3
Note Addresses from FFD0H to FFDFH cannot be accessed with these operands.
Remark For special function register symbols, refer to Tables 3-6 to 3-9 Special Function Register List.