Datasheet

78K0/Ix2 CHAPTER 25 FLASH MEMORY
R01UH0010EJ0500 Rev.5.00 669
Feb 28, 2012
25.9 Creating ROM Code to Place Order for Previously Written Product
Before placing an order with Renesas Electronics for a previously written product, the ROM code for the order must be
created.
To create the ROM code, use the Hex Consolidation Utility (hereafter abbreviated to HCU) on the finished programs
(hex files) and optional data (such as security settings for flash memory programs).
The HCU is a software tool that includes functions required for creating ROM code.
The HCU can be downloaded at the Renesas Electronics website.
(1) Website
http://www2.renesas.com/micro/en/ods/  Click Version-up Service.
(2) Downloading the HCU
To download the HCU, click Software for previously written flash products and then HCU_GUI.
Remark For details about how to install and use the HCU, see the materials (the user’s manual) that comes with the
HCU at the above website.
25.9.1 Procedure for using ROM code to place an order
Use the HC
U to create the ROM code by following the procedure below, and then place your order with Renesas
Electronics. For details, see the ROM Code Ordering Method Information (C10302J).
Customer Renesas Electronics
Decide which product to order.
Renesas Electronics processes
the product name and number
and creates a record of the
transaction.
Create the ROM code
Note
Check the ROM order details and
generate the required data.
Renesas Electronics processes
the ROM code.
Note Use the HCU to create the ROM code for the order.
Send the order information.
Renesas Electronics sends the order number
and other order-related information.
Send the data required for the ROM order.