Datasheet

78K0/Ix2 CHAPTER 25 FLASH MEMORY
R01UH0010EJ0500 Rev.5.00 663
Feb 28, 2012
Table 25-9. Processing Time for Each Command When PG-FP5 Is Used (Reference) (2/2)
(3) Products with internal ROMs of the 16 KB: PD78F0742, 78F0744, 78F0746, 78F0752, 78F0754, 78F0756
Command of PG-FP5 Port: UART-Internal-OSC (Internal high-speed oscillation clock (fIH: 8 MHz (typ.)),
Speed: 500,000 bps
Signature 0.5 s (typ.)
Blankcheck 0.5 s (typ.)
Erase 1 s (typ.)
Program 2.5 s (typ.)
Verify 1.5 s (typ.)
E.P.V 2.5 s (typ.)
Checksum 1 s (typ.)
Security 0.5 s (typ.)
Caution When executing boot swapping, do not use the E.P.V. command with the dedicated flash memory
programmer.