Datasheet

78K0/Ix2 CHAPTER 18 INTERRUPT FUNCTIONS
R01UH0010EJ0500 Rev.5.00 586
Feb 28, 2012
Figure 18-10. Format of Priority Specification Flag Registers (PR0L, PR0H, PR1L, PR1H) (78K0/IB2)
Address: FFE8H After reset: FFH R/W
Symbol <7> <6> <5> <4> <3> <2> <1> <0>
PR0L SREPR6 PPR5 PPR4 PPR3 PPR2 PPR1
Note
PPR0 LVIPR
Address: FFE9H After reset: FFH R/W
Symbol <7> <6> <5> <4> <3> <2> <1> <0>
PR0H TMPR010 TMPR000 TMPRX1 TMPRX0 TMPRH1 CSIPR11 STPR6 SRPR6
Address: FFEAH After reset: FFH R/W
Symbol 7 <6> <5> <4> <3> 2 1 <0>
PR1L 1 CMPPR2 CMPPR1 CMPPR0 TMPR51 1 1 ADPR
Address: FFEBH After reset: FFH R/W
Symbol 7 6 5 4 3 2 1 <0>
PR1H 1 1 1 1 1 1 1 IICAPR0
XXPRX Priority level selection
0 High priority level
1 Low priority level
Note 78K0/IB2 (30 pins) only
Caution When using the 78K0/IB2 (30 pins), be sure to set bits 1, 2, and 7 of PR1L, and bits 1 to 7 of PR1H to 1.
When using the 78K0/IB2 (32 pins), be sure to set bit 2 of PR0L, bits 1, 2, and 7 of PR1L, and bits 1 to 7
of PR1H to 1.