Datasheet

78K0/Ix2 CHAPTER 7 16-BIT TIMER/EVENT COUNTER 00
R01UH0010EJ0500 Rev.5.00 305
Feb 28, 2012
Figure 7-45. Example of Register Settings for One-Shot Pulse Output Operation (2/2)
(e) 16-bit timer counter 00 (TM00)
By reading TM00, the count value can be read.
(f) 16-bit capture/compare register 000 (CR000)
This register is used as a compare register when a one-shot pulse is output. When the value of TM00 matches
that of CR000, an interrupt signal (INTTM000) is generated and the TO00 output level is inverted.
(g) 16-bit capture/compare register 010 (CR010)
This register is used as a compare register when a one-shot pulse is output. When the value of TM00 matches
that of CR010, an interrupt signal (INTTM010) is generated and the TO00 output level is inverted.
Caution Do not set the same value to CR000 and CR010.