Datasheet

78K0/Ix2 CHAPTER 6 16-BIT TIMERS X0 AND X1
R01UH0010EJ0500 Rev.5.00 202
Feb 28, 2012
Figure 6-16. 16-bit timer X1 output control register 0 (TX1IOC0)
Address: FF9BH After reset: 00H R/W
Symbol 7 6 5 4 <3> <2> <1> <0>
TX1IOC0 0 0 0 0 TX1TOC1 TX1TOC0 TX1TOL1 TX1TOL0
TX1TOC1 TOX11 output control
0
Disables timer output (Fixes to low-level output when TX1TOL1 = 0, and fixes to high-level output
when TX1TOL1 = 1.)
1 Enables timer output (PWM output)
TX1TOC0 TOX10 output control
0
Disables timer output (Fixes to low-level output when TX1TOL0 = 0, and fixes to high-level output
when TX1TOL0 = 1.)
1 Enables timer output (PWM output)
TX1TOL1 Default TOX11 output state setting
0 Normal output (low level)
1 Inverted output (high level)
TX1TOL0 Default TOX10 output state setting
0 Normal output (low level)
1 Inverted output (high level)
Cautions 1. During the timer operation, setting the other bits of TX1IOC0 is prohibited. However, TX1IOC0
can be refreshed (the same value is written).
2. The actual TOX10/P33 and TOX11/P34/INTP4 pin outputs are determined depending on PM33, P33,
PM34, and P34 besides TOX10 and TOX11 outputs.