Datasheet
78K0/Ix2 CHAPTER 6 16-BIT TIMERS X0 AND X1
R01UH0010EJ0500 Rev.5.00 201
Feb 28, 2012
(6) 16-bit timer Xn output control register 0 (TXnIOC0)
TXnIOC0 is a register that sets the timer output.
TXnIOC0 can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears TXnIOC0 to 00H.
Remark n = 0, 1
Figure 6-15. 16-bit timer X0 output control register 0 (TX0IOC0)
Address: FF83H After reset: 00H R/W
Symbol 7 6 5 4 <3> <2> <1> <0>
TX0IOC0 0 0 0 0 TX0TOC1 TX0TOC0 TX0TOL1 TX0TOL0
TX0TOC1 TOX01 output control
0
Disables timer output (Fixes to low-level output when TX0TOL1 = 0, and fixes to high-level output
when TX0TOL1 = 1.)
1 Enables timer output (PWM output)
TX0TOC0 TOX00 output control
0
Disables timer output (Fixes to low-level output when TX0TOL0 = 0, and fixes to high-level output
when TX0TOL0 = 1.)
1 Enables timer output (PWM output)
TX0TOL1 Default TOX01 output state setting
0 Normal output (low level)
1 Inverted output (high level)
TX0TOL0 Default TOX00 output state setting
0 Normal output (low level)
1 Inverted output (high level)
Cautions 1. During the timer operation, setting the other bits of TX0IOC0 is prohibited. However, TX0IOC0
can be refreshed (the same value is written).
2. The actual TOX00/P31/INTP2/TOOLC1 and TOX01/P32/INTP3/TOOLD1 pin outputs are determined
depending on PM31, P31, PM32, and P32 besides TOX00 and TOX01 outputs.