Datasheet

78K0/Kx2-L CHAPTER 25 FLASH MEMORY
R01UH0028EJ0400 Rev.4.00 711
Sep 27, 2010
Table 25-9. Processing Time for Each Command When PG-FP5 Is Used (Reference) (3/3)
(2) 78K0/KB2-L, 78K0/KC2-L (2/2)
(b) Products with internal ROMs of the 16 KB: μPD78F0572, 78F0577, 78F0582, 78F0587
Command of PG-FP5 Port: UART-Internal-OSC (Internal high-speed oscillation clock (fIH: 8 MHz (typ.)),
Speed: 500,000 bps
Signature 0.5 s (typ.)
Blankcheck 1 s (typ.)
Erase 1 s (typ.)
Program 2.5 s (typ.)
Verify 1.5 s (typ.)
E.P.V 2.5 s (typ.)
Checksum 1 s (typ.)
Security 1 s (typ.)
(c) Products with internal ROMs of the 32 KB: μPD78F0573, 78F0578, 78F0583, 78F0588
Command of PG-FP5 Port: UART-Internal-OSC (Internal high-speed oscillation clock (fIH: 8 MHz (typ.)),
Speed: 500,000 bps
Signature 0.5 s (typ.)
Blankcheck 1 s (typ.)
Erase 1 s (typ.)
Program 4.5 s (typ.)
Verify 3 s (typ.)
E.P.V 4.5 s (typ.)
Checksum 1 s (typ.)
Security 1 s (typ.)
Caution When executing boot swapping, do not use the E.P.V. command with the dedicated flash memory
programmer.