Datasheet

78K0/Kx2-L CHAPTER 17 INTERRUPT FUNCTIONS
R01UH0028EJ0400 Rev.4.00 596
Sep 27, 2010
17.3 Registers Controlling Interrupt Functions
The following 6 types of registers are used to control the interrupt functions.
Interrupt request flag registers (IF0L, IF0H, IF1L, IF1H)
Interrupt mask flag registers (MK0L, MK0H, MK1L, MK1H)
Priority specification flag registers (PR0L, PR0H, PR1L, PR1H)
External interrupt rising edge enable registers (EGPCTL0, EGPCTL1)
External interrupt falling edge enable registers (EGNCTL0, EGNCTL1)
Program status word (PSW)
Table 17-2 shows a list of interrupt request flags, interrupt mask flags, and priority specification flags corresponding to
interrupt request sources.
Table 17-2. Flags Corresponding to Interrupt Request Sources (1/2)
Interrupt Request Flag Interrupt Mask Flag Priority Specification Flag
KY
2-L
KA
2-L
KB
2-L
KC2-L
16
pins
20
pins
25,
32
pins
30
pins
40
pins
44
pins
48
pins
Interrupt
Source
Register Register Register
INTLVI LVIIF IF0L LVIMK MK0L LVIPR PR0L
INTP0 PIF0 PMK0 PPR0
INTP1 PIF1 PMK1 PPR1
INTP2 PIF2 PMK2 PPR2
INTP3 PIF3 PMK3 PPR3
INTP4 PIF4 PMK4 PPR4
INTP5 PIF5 PMK5 PPR5
INTSRE6 SREIF6 SREMK6 SREPR6
INTSR6 SRIF6 IF0H SRMK6 MK0H SRPR6 PR0H
INTST6 STIF6 STMK6 STPR6
INTCSI10 CSIIF10 CSIMK10 CSIPR10
INTCSI11 CSIIF11 CSIMK11 CSIPR11
INTTMH1 TMIFH1 TMMKH1 TMPRH1
INTTMH0 TMIFH0
TMMKH0
TMPRH0
INTTM50 TMIF50 TMMK50 TMPR50
INTTM000 TMIF000 TMMK000 TMPR000
INTTM010 TMIF010 TMMK010 TMPR010
<R>