Datasheet

78K0/Kx2-L CHAPTER 8 8-BIT TIMERS H0 AND H1
R01UH0028EJ0400 Rev.4.00 352
Sep 27, 2010
Figure 8-15. Operation Timing in PWM Output Mode (1/4)
(a) Basic operation
Count clock
8-bit timer counter Hn
CMP0n
TMHEn
INTTMHn
TOHn
(TOLEVn = 0)
TOHn
(TOLEVn = 1)
00H 01H A5H 00H 01H 02H A5H 00H A5H 00H01H 02H
CMP1n
A5H
01H
<1>
<2>
<3>
<4>
<1> The count operation is enabled by setting the TMHEn bit to 1. Start the 8-bit timer counter Hn by masking one
count clock to count up. At this time, PWM output outputs an inactive level.
<2> When the values of the 8-bit timer counter Hn and the CMP0n register match, an active level is output. At this
time, the value of the 8-bit timer counter Hn is cleared, and the INTTMHn signal is output.
<3> When the values of the 8-bit timer counter Hn and the CMP1n register match, an inactive level is output. At this
time, the 8-bit timer counter value is not cleared and the INTTMHn signal is not output.
<4> Clearing the TMHEn bit to 0 during timer Hn operation sets the INTTMHn signal to the default and PWM output to
an inactive level.
Remark 78K0/KY2-L, 78K0/KA2-L: n = 1
78K0/KB2-L, 78K0/KC2-L: n = 0, 1