Datasheet

78K0/Kx2-L CHAPTER 1 OUTLINE
R01UH0028EJ0400 Rev.4.00 6
Sep 27, 2010
1.3 Pin Configuration (Top View)
1.3.1 78K0/KY2-L
• 16-pin plastic SSOP (5.72 mm (225))
P01/TO00/TI010
RESET/P125
P121/X1/TOOLC0
14
13
12
16
15
11
10
9
P00/TI000/INTP0
ANI0/P20/AMP0-
Note
ANI1/P21/AMP0OUT
Note
/PGAIN
Note
P30/TOH1/TI51/INTP1
P60/SCLA0/TxD6
ANI2/P22/AMP0+
Note
1
2
3
4
5
6
7
8
ANI3/P23
P122/X2/EXCLK/TOOLD0
AV
REF
REGC
P61/SDAA0/RxD6
V
DD
V SS
AMP0-
Note
, AMP0+
Note
:
Amplifier Input P121, P122, P125 : Port 12
AMP0OUT
Note
:
Amplifier Output REGC : Regulator Capacitance
PGAIN
Note
:
Programmable Gain RESET : Reset
Amplifier Input RxD6 : Receive Data
ANI0 to ANI3 : Analog Input SCLA0 : Serial Clock Input/Output
AV
REF : Analog Reference SDAA0 : Serial Data Input/Output
Voltage TI000, TI010, TI51 : Timer Input
EXCLK : External Clock Input TO00, TOH1 : Timer Output
(Main System Clock) TOOLC0 : Clock Input for Tool
INTP0, INTP1 : External Interrupt TOOLD0 : Data Input/Output for Tool
Input TxD6 : Transmit Data
P00, P01 : Port 0 V
DD : Power Supply
P20 to P23 : Port 2 V
SS : Ground
P30 : Port 3 X1, X2 : Crystal Oscillator
P60, P61 : Port 6 (Main System Clock)
Note
μ PD78F0555, 78F0556, 78F0557 (products with operational amplifier) only
Cautions 1. V
SS functions alternately as the ground potential of the A/D converter. Be sure to connect VSS to
a stabilized GND (= 0 V).
2. Connect the REGC pin to V
SS via a capacitor (0.47 to 1 μ F).
3. ANI0/P20/AMP0-, ANI1/P21/AMP0OUT/PGAIN, ANI2/P22/AMP0+, and ANI3/P23 are set in the
analog input mode after release of reset.
4. RESET/P125 immediately after release of reset is set in the external reset input.