Datasheet

78K0/Kx2-L CHAPTER 4 PORT FUNCTIONS
R01UH0028EJ0400 Rev.4.00 182
Sep 27, 2010
Figure 4-48. Format of A/D Port Configuration Register 0, 1 (ADPC0, ADPC1) (2/2)
(e) 78K0/KB2-L
Address: FF2EH After reset: 00H R/W
Symbol 7 6 5 4 3 2 1 0
ADPC0 0 0 0 0 ADPCS3 ADPCS2 ADPCS1 ADPCS0
Address: FF2FH After reset: 07H R/W
Symbol 7 6 5 4 3 2 1 0
ADPC1 0 0 0 0 0 ADPCS10 ADPCS9 ADPCS8
(f) 78K0/KC2-L (40-pin products)
Address: FF2EH After reset: 00H R/W
Symbol 7 6 5 4 3 2 1 0
ADPC0 0 ADPCS6 ADPCS5 ADPCS4 ADPCS3 ADPCS2 ADPCS1 ADPCS0
Address: FF2FH After reset: 07H R/W
Symbol 7 6 5 4 3 2 1 0
ADPC1 0 0 0 0 0 ADPCS10 ADPCS9 ADPCS8
(g) 78K0/KC2-L (44-pin and 48-pin products)
Address: FF2EH After reset: 00H R/W
Symbol 7 6 5 4 3 2 1 0
ADPC0 ADPCS7 ADPCS6 ADPCS5 ADPCS4 ADPCS3 ADPCS2 ADPCS1 ADPCS0
Address: FF2FH After reset: 07H R/W
Symbol 7 6 5 4 3 2 1 0
ADPC1 0 0 0 0 0 ADPCS10 ADPCS9 ADPCS8
ADPCSn Digital I/O or analog I/O selection (n = 0 to 10)
0 Analog I/O
1 Digital I/O
Cautions 1. Set the pin set to analog input to the input mode by using port mode register 1, 2, and 7 (PM1,
PM2, and PM7).
2. If data is written to ADPC0 and ADPC1, a wait cycle is generated. Do not write data to ADPC0 and
ADPC1 when the peripheral hardware clock is stopped. For details, refer to CHAPTER 31
CAUTIONS FOR WAIT.