Datasheet

CHAPTER 27 ELECTRICAL SPECIFICATIONS (STANDARD PRODUCTS)
User’s Manual U18698EJ1V0UD
548
Standard
p
roducts
DC Characteristics (4/5)
(TA = −40 to +85°C, 1.8 V ≤ VDD ≤ 5.5 V, AVREF ≤ VDD, VSS = AVSS = 0 V)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Square wave input 1.6 3.0
fXH = 10 MHz
Note 2
,
V
DD = 5.0 V
Resonator connection 2.3 3.4
mA
Square wave input 1.5 2.9
fXH = 10 MHz
Note 2
,
V
DD = 3.0 V
Resonator connection 2.2 3.3
mA
Square wave input 0.9 1.7
fXH = 5 MHz
Note 2
,
V
DD = 3.0 V
Resonator connection 1.3 2.0
mA
Square wave input 0.7 1.4
fXH = 5 MHz
Note 2
,
V
DD = 2.0 V
Resonator connection 1.0 1.6
mA
fRH = 8 MHz, VDD = 5.0 V
Note 3
1.4 2.3 mA
IDD1 Operating mode
f
SUB = 32.768 kHz
Note 4
,
V
DD = 5.0 V
Resonator connection 6.7 26
μ A
Square wave input 0.4 1.4
fXH = 10 MHz
Note 2
,
V
DD = 5.0 V
Resonator connection 1.0 1.7
mA
Square wave input 0.2 0.7
fXH = 5 MHz
Note 2
,
V
DD = 3.0 V
Resonator connection 0.5 1.0
mA
fRH = 8 MHz, VDD = 5.0 V
Note 3
0.4 1.2 mA
IDD2 HALT mode
f
SUB = 32.768 kHz
Note 4
,
V
DD = 5.0 V
Resonator connection 2.4 22 μ A
VDD = 5.0 V 1 20 μ A
Supply current
Note 1
I
DD3
Note 5
STOP mode
V
DD = 5.0 V, TA = −40 to +70°C 1 10 μ A
Notes 1. Total current flowing into the internal power supply (VDD), including the peripheral operation current and
the input leakage current flowing when the level of the input pin is fixed to V
DD or VSS. However, the
current flowing into the pull-up resistors and the output current of the port are not included.
2. Not including the operating current of the 8 MHz internal oscillator, 240 kHz internal oscillator and XT1
oscillation, and the current flowing into the A/D converter, watchdog timer, LVI circuit and LCD
controller/driver.
3. Not including the operating current of the X1 oscillation, XT1 oscillation and 240 kHz internal oscillator,
and the current flowing into the A/D converter, watchdog timer, LVI circuit and LCD controller/driver.
4. Not including the operating current of the X1 oscillation, 8 MHz internal oscillator and 240 kHz internal
oscillator, and the current flowing into the A/D converter, watchdog timer, LVI circuit and LCD
controller/driver.
5. Not including the operating current of the 240 kHz internal oscillator and XT1 oscillation, and the current
flowing into the A/D converter, watchdog timer, LVI circuit and LCD controller/driver.
Remarks 1. f
XH: High-speed system clock frequency (X1 clock oscillation frequency or external main system clock
frequency)
2. f
RH: Internal high-speed oscillation clock frequency
3. fSUB: Subsystem clock frequency (XT1 clock oscillation frequency)