Datasheet

CHAPTER 27 ELECTRICAL SPECIFICATIONS (STANDARD PRODUCTS)
User’s Manual U18698EJ1V0UD
542
Standard
p
roducts
Absolute Maximum Ratings (T
A = 25°C) (2/2)
Parameter Symbol Conditions Ratings Unit
Per pin
P12, P13, P31 to P34, P40,
P100, P101, P112, P113,
P120, P140 to P143,
P150 to P153
−10 mA
P12, P13, P31 to P34, P40,
P120
−25 mA
IOH1
Total of all pins
−35 mA
P100, P101, P112, P113,
P140 to P143, P150 to P153
−10 mA
Per pin −0.5 mA
Output current, high
I
OH2
Total of all pins
P20 to P25
−2 mA
Per pin
P12, P13, P31 to P34, P40,
P100, P101, P112, P113,
P120, P140 to P143,
P150 to P153
30 mA
P12, P13, P31 to P34, P40,
P120
40 mA
Total of all pins
80 mA
P100, P101, P112, P113,
P140 to P143, P150 to P153
40 mA
Per pin 1 mA
Output current, low IOL
Total of all pins
P20 to P25
5 mA
In normal operation mode
Operating ambient
temperature
T
A
In flash memory programming mode
−40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.