Datasheet

CHAPTER 24 FLASH MEMORY
User’s Manual U18698EJ1V0UD
521
Table 24-9. Relationship Between Enabling Security Function and Command
(1) During on-board/off-board programming
Executed Command Valid Security
Batch Erase (Chip Erase) Block Erase Write
Prohibition of batch erase (chip erase) Cannot be erased in batch Can be performed
Note
.
Prohibition of block erase Can be performed.
Prohibition of writing
Can be erased in batch.
Blocks cannot be
erased.
Cannot be performed.
Prohibition of rewriting boot cluster 0 Cannot be erased in batch
Boot cluster 0 cannot be
erased.
Boot cluster 0 cannot be
written.
Note Confirm that no data has been written to the write area. Because data cannot be erased after batch erase
(chip erase) is prohibited, do not write data if the data has not been erased.
(2) During self programming
Executed Command Valid Security
Block Erase Write
Prohibition of batch erase (chip erase)
Prohibition of block erase
Prohibition of writing
Blocks can be erased. Can be performed.
Prohibition of rewriting boot cluster 0 Boot cluster 0 cannot be erased. Boot cluster 0 cannot be written.
Table 24-10 shows how to perform security settings in each programming mode.
Table 24-10. Setting Security in Each Programming Mode
(1) On-board/off-board programming
Security Security Setting How to Disable Security Setting
Prohibition of batch erase (chip erase) Cannot be disabled after set.
Prohibition of block erase
Prohibition of writing
Execute batch erase (chip erase)
command
Prohibition of rewriting boot cluster 0
Set via GUI of dedicated flash memory
programmer, etc.
Cannot be disabled after set.
(2) Self programming
Security Security Setting How to Disable Security Setting
Prohibition of batch erase (chip erase) Cannot be disabled after set.
Prohibition of block erase
Prohibition of writing
Execute batch erase (chip erase)
command during on-board/off-board
programming (cannot be disabled during
self programming)
Prohibition of rewriting boot cluster 0
Set by using information library.
Cannot be disabled after set.