Datasheet

CHAPTER 17 INTERRUPT FUNCTIONS
User’s Manual U18698EJ1V0UD
437
Table 17-1. Interrupt Source List (2/2)
Interrupt Source
Interrupt
Type
Default
Priority
Note 1
Name Trigger
Internal/
External
Vector
Table
Address
Basic
Configuration
Type
Note 2
20 INTTM52
Match between TM52 and CR52
(when compare register is specified)
0032H
21 INTTMH2
Match between TMH2 and CRH2
(when compare register is specified)
0034H
Maskable
22 INTMCG End of Manchester code reception
Internal
0036H
(A)
Software
BRK BRK instruction execution
003EH (D)
RESET Reset input
POC Power-on clear
LVI Low-voltage detection
Note 3
Reset
WDT WDT overflow
0000H
Notes 1. The default priority determines the sequence of processing vectored interrupts if two or more maskable
interrupts occur simultaneously. Zero indicates the highest priority and 22 indicates the lowest priority.
2. Basic configuration types (A) to (D) correspond to (A) to (D) in Figure 17-1.
3. When bit 1 (LVIMD) of the low-voltage detection register (LVIM) is set to 1.