Datasheet

Data Sheet S16265EJ5V0DS
17
µ PD720101
USB interface block
Parameter Symbol Conditions Min. Max. Unit
Serial resistor between DP (DM) and
RSDP (RSDM)
RS 35.64 36.36
Ω
Output pin impedance ZHSDRV Includes RS resistor 40.5 49.5
Ω
Input Levels for Low-/full-speed:
High-level input voltage (drive) VIH 2.0 V
High-level input voltage (floating) VIHZ 2.7 3.6 V
Low-level input voltage VIL 0.8 V
Differential input sensitivity VDI (D+) − (D−) 0.2 V
Differential common mode range VCM Includes VDI range 0.8 2.5 V
Output Levels for Low-/full-speed:
High-level output voltage VOH RL of 14.25 kΩ to GND 2.8 3.6 V
Low-level output voltage VOL RL of 1.425 kΩ to 3.6 V 0.0 0.3 V
SE1 VOSE1 0.8 V
Output signal crossover point voltage VCRS 1.3 2.0 V
Input Levels for High-speed:
High-speed squelch detection threshold
(differential signal)
VHSSQ 100 150 mV
High-speed disconnect detection
threshold (differential signal)
VHSDSC 525 625 mV
High-speed data signaling common
mode voltage range
VHSCM −50 +500 mV
High-speed differential input signaling
level
See Figure 3-4.
Output Levels for High-speed:
High-speed idle state VHSOI −10 +10 mV
High-speed data signaling high VHSOH 360 440 mV
High-speed data signaling low VHSOL −10 +10 mV
Chirp J level (differential signal) VCHIRPJ 700 1100 mV
Chirp K level (differential signal) VCHIRPK −900 −500 mV