Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 20 CAN CONTROLLER
R01UH0042EJ0500 Rev.5.00 Page 968 of 1513
Aug 12, 2011
(2/2)
(a) Read
TSLOCK Time stamp lock function enable bit
0
Time stamp lock function stopped.
The TSOUT signal toggles each time the selected time stamp capture event occurs.
1
Time stamp lock function enabled.
The TSOUT signal toggled each time the selected time stamp capture event occurred. However, the
TSOUT output signal is locked when a data frame has been correctly received to message buffer
0
Note
.
Note The TSEN bit is automatically cleared to 0.
TSSEL Time stamp capture event selection bit
0 The time stamp capture event is SOF.
1 The time stamp capture event is the last bit of EOF.
TSEN TSOUT operation setting bit
0 TSOUT toggle operation is disabled.
1 TSOUT toggle operation is enabled.
Remark The TSOUT signal is output from the CAN controller to a timer. For details, refer to CHAPTER 7 16-
BIT TIMER/EVENT COUNTER A (TAA).
(b) Write
Set TSLOCK Clear TSLOCK Setting of TSLOCK bit
0 1 TSLOCK bit is cleared to 0.
1 0 TSLOCK bit is set to 1.
Other than above TSLOCK bit is not changed.
Set TSSEL Clear TSSEL Setting of TSSEL bit
0 1 TSSEL bit is cleared to 0.
1 0 TSSEL bit is set to 1.
Other than above TSSEL bit is not changed.
Set TSEN Clear TSEN Setting of TSEN bit
0 1 TSEN bit is cleared to 0.
1 0 TSEN bit is set to 1.
Other than above
TSEN bit is not changed
.