Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 20 CAN CONTROLLER
R01UH0042EJ0500 Rev.5.00 Page 963 of 1513
Aug 12, 2011
(14) CAN0 module last in-pointer register (C0LIPT)
The C0LIPT register indicates the number of the message buffer in which a data frame or a remote frame was last
stored.
After reset: Undefined R Address: 03FEC05EH
7 6 5 4 3 2 1 0
C0LIPT LIPT7 LIPT6 LIPT5 LIPT4 LIPT3 LIPT2 LIPT1 LIPT0
LIPT7 to LIPT0 Last in-pointer register (C0LIPT)
0 to 31
When the C0LIPT register is read, the contents of the element indexed by the last in-pointer
(LIPT) of the receive history list are read. These contents indicate the number of the message
buffer in which a data frame or a remote frame was last stored.
Remark The read value of the C0LIPT register is undefined if a data frame or a remote frame has never been
stored in the message buffer. If the C0RGPT.RHPM bit is set to 1 after the CAN module has
changed from the initialization mode to an operation mode, therefore, the read value of the C0LIPT
register is undefined.