Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 20 CAN CONTROLLER
R01UH0042EJ0500 Rev.5.00 Page 913 of 1513
Aug 12, 2011
(6) Initializing CAN module error counter register (C0ERC) in initialization mode
If it is necessary to initialize the C0ERC and C0INFO registers for debugging or evaluating a program, they can be
initialized to the default value by setting the C0CTRL.CCERC bit in the initialization mode. When initialization has
been completed, the CCERC bit is automatically cleared to 0.
Cautions 1. This function is enabled only in the initialization mode. Even if the CCERC bit is set to 1 in a
CAN operation mode, the C0ERC and C0INFO registers are not initialized.
2. The CCERC bit can be set at the same time as the request to enter a CAN operation mode.