Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 15 A/D CONVERTER
R01UH0042EJ0500 Rev.5.00 Page 714 of 1513
Aug 12, 2011
(7) Integral linearity error
This error indicates the extent to which the conversion characteristics differ from the ideal linear relationship. It
indicates the maximum value of the difference between the actually measured value and its theoretical value where
the zero-scale error and full-scale error are 0.
Figure 15-21. Integral Linearity Error
1
......
1
0
......
0
0AV
REF0
Analog input
Digital output
Ideal line
Integral
linearity error
(8) Conversion time
This is the time required to obtain a digital output after each trigger has been generated.
The conversion time in the characteristics table includes the sampling time.
(9) Sampling time
This is the time for which the analog switch is ON to load an analog voltage to the sample & hold circuit.
Figure 15-22. Sampling Time
Sampling time
Conversion time