Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 11 MOTOR CONTROL FUNCTION
R01UH0042EJ0500 Rev.5.00 Page 634 of 1513
Aug 12, 2011
Figure 11-39. Example of A/D Conversion Start Trigger (TABTADT0) Signal Output
(TAB1OPT1.TAB1ICE Bit = 0, TAB1OPT1.TAB1IOE Bit = 1,
TAB1OPT1.TAB1ID4 to TAB1OPT1.TAB1ID0 Bits = 00010: With Interrupt Culling) (1)
16-bit
counter
INTTAB1OV signal
TABTADT0 signal
TAB1AT3 to TAB1AT0 bits = 0011 (both INTTAB1CC0 and INTTAB1OV signals are selected but
crest interrupt (INTTAB1CC0) is not output because interrupt culling is not specified)
INTTAB1CC0 signal
L
Remark : Culled interrupt
Figure 11-40. Example of A/D Conversion Start Trigger (TABTADT0) Signal Output
(TAB1OPT1.TAB1ICE Bit = 0, TAB1OPT1.TAB1IOE Bit = 1,
TAB1OPT1.TAB1ID4 to TAB1OPT1.TAB1ID0 Bits = 00010: With Interrupt Culling) (2)
16-bit
counter
INTTAB1OV signal
TABTADT0 signal
TAB1AT3 to TAB1AT0 bits = 0101, TAB1ATM2 bit = 1
TAB1CUF bit
INTAA4CC1 signal
INTAA4CC0 signal
INTTAB1CC0 signal
L
Caution The INTTAB1CC0 signal is culled but the INTTAA4CC0 signal is not.
Remark
: Culled interrupt