Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 9 16-BIT TIMER/EVENT COUNTER T (TMT)
R01UH0042EJ0500 Rev.5.00 Page 441 of 1513
Aug 12, 2011
(2/2)
Cautions 1. The TT0EST bit is valid only in the external trigger pulse output mode or one-shot pulse
output mode. In any other mode, writing 1 to this bit is ignored.
2. The TT0EEE bit is valid only in the interval timer mode, external trigger pulse output mode,
one-shot pulse output mode, PWM output mode, free-running timer mode, pulse width
measurement mode, or triangular-wave PWM output mode. In any other mode, writing 1 to
this bit is ignored.
3. External event count input (EVTT0) or encoder inputs (TENC00, TENC01) is selected in the
external event count mode or encoder compare mode regardless of the value of the
TT0EEE bit.
4. Set the TT0EEE and TT0MD3 to TT0MD0 bits when the TT0CTL0.TT0CE bit = 0. (The same
value can be written when the TT0CE bit = 1.) The operation is not guaranteed when
rewriting is performed with the TT0CE bit = 1. If rewriting was mistakenly performed, clear
the TT0CE bit to 0 and then set the bits again.
5. Be sure to set bits 4 and 7 to “0”.