Datasheet
V850ES/JG3-H, V850ES/JH3-H CHAPTER 9 16-BIT TIMER/EVENT COUNTER T (TMT)
R01UH0042EJ0500 Rev.5.00 Page 438 of 1513
Aug 12, 2011
9.3.1 Pin configuration
The timer inputs and outputs that configure TMT0 are shared with the following ports. The port functions must be set
when using each pin (see Table 4-20 Using Port Pin as Alternate-Function Pin).
Table 9-2. Pin Configuration
Port Timer Input Pin Timer Output Other Alternate Function
P92 TIT01 (capture trigger input 1) TENC01 (encoder input) TOT01 A2
Note 1
P93 TIT00 (capture trigger input 0) TECR0 (encoder clear input) TOT00 A3
Note 1
P94 EVTT0/TENC00
Note 2
− − −
Notes 1. V850ES/JH3-H only
2. The external event count input (EVTT0), encoder input (TENC00), and external trigger input are shared in a
state that cannot be controlled by using the port functions. To use each function, set them by using the
TT0IOC2 and TT0IOC3 registers after setting their corresponding ports.