Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 8 16-BIT TIMER/EVENT COUNTER AB (TAB)
R01UH0042EJ0500 Rev.5.00 Page 351 of 1513
Aug 12, 2011
8.5 Operation
TABn can perform the following operations.
Operation
TABnCTL1.TABnEST Bit
(Software Trigger Bit)
TIABn0 Pin
(External Trigger Input)
Capture/Compare
Register Setting
Compare Register
Write
Interval timer mode Invalid Invalid Compare only Anytime write
External event count mode
Note 1
Invalid Invalid Compare only Anytime write
External trigger pulse output mode
Note 2
Valid Valid Compare only Batch write
One-shot pulse output mode
Note 2
Valid Valid Compare only Anytime write
PWM output mode Invalid Invalid Compare only Batch write
Free-running timer mode Invalid Invalid Switching enabled Anytime write
Pulse width measurement mode
Note 2
Invalid Invalid Capture only Not applicable
Triangular wave PWM mode Invalid Invalid Compare only Batch write
Notes 1. To use the external event count mode, specify that the valid edge of the TIABn0 pin capture trigger input is
not detected (by clearing the TABnIOC1.TABnIS1 and TABnIOC1.TABnIS0 bits to “00”).
2. When using the external trigger pulse output mode, one-shot pulse output mode, and pulse width
measurement mode, select the internal clock as the count clock (by clearing the TABnCTL1.TABnEEE bit to
0).
Remark n = 0, 1