Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 7 16-BIT TIMER/EVENT COUNTER AA (TAA)
R01UH0042EJ0500 Rev.5.00 Page 227 of 1513
Aug 12, 2011
(9) TAAn capture/compare register 0 (TAAnCCR0)
The TAAnCCR0 register can be used as a capture register or a compare register depending on the mode.
This register can be used as a capture register or a compare register only in the free-running timer mode,
depending on the setting of the TAAnOPT0.TAAnCCS0 bit. In the pulse width measurement mode, the TAAnCCR0
register can be used only as a capture register. In any other mode, this register can be used only as a compare
register.
The TAAnCCR0 register can be read or written during operation.
This register can be read or written in 16-bit units.
Reset sets this register to 0000H.
Caution Accessing the TAAnCCR0 register is prohibited in the following statuses. For details, see 3.4.9
(2) Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is stopped
• When the CPU operates with the internal oscillation clock
TAAnCCR0
(n = 0 to 5)
12 10 8 6 4 2
After reset: 0000H R/W Address: TAA0CCR0 FFFFF636H, TAA1CCR0 FFFFF646H,
TAA2CCR0 FFFFF656H, TAA3CCR0 FFFFF666H,
TAA4CCR0 FFFFF676H, TAA5CCR0 FFFFF686H
14 0
13 11 9 7 5 3
15 1