Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 7 16-BIT TIMER/EVENT COUNTER AA (TAA)
R01UH0042EJ0500 Rev.5.00 Page 216 of 1513
Aug 12, 2011
7.3.1 Pin configuration
The timer inputs and outputs that configure TAAn are shared with the following ports. The port functions must be set
when using each pin (see Table 4-20 When Using Port Pins as Alternate-Function Pins).
Table 7-2 Pin Configuration
Channel Port Timer AA Input Timer AA Output Other Alternate Function
P32 TIAA00
Note 1
TOAA00 ASCK0/SCKF4 TAA0
P33 TIAA01 TOAA01 RTCDIV/RTCCL
P34 TIAA10
Note 1
TOAA10 TOAA1OFF/INTP09 TAA1
P35 TIAA11 TOAA11 RTC1HZ
P97 TIAA20
Note 1
TOAA20 SIF1/A7
Note 2
TAA2
P96 TIAA21 TOAA21 INTP11/A6
Note 2
P95 TIAA30
Note 1
TOAA30 A5
Note 2
TAA3
P94 TIAA31 TOAA31 TENC00/EVTT0/A4
Note 2
− − − −
TAA4
− − − −
P915 TIAA50
Note 1
TOAA50 INTP18/A15
Note 2
TAA5
P914 TIAA51 TOAA51 INTP17/A14
Note 2
Notes 1. The TAAm0 pin functions alternately as a capture trigger input function, external event input function, and
external trigger input function.
2. V850ES/JH3-H only
Remark TAA4 has neither timer inputs nor outputs. Consequently, only the interval timer function can use TAA4 by
itself. However, the 6-phase PWM output function can be achieved by using TAA4 together with TAB1.