Datasheet
V850ES/JG3-H, V850ES/JH3-H CHAPTER 1 INTRODUCTION
R01UH0042EJ0500 Rev.5.00 Page 20 of 1513
Aug 12, 2011
Table 1-1. V850ES/JG3-H Product List
Generic Name V850ES/JG3-H
Part Number
μ
PD70F3760
μ
PD70F3761
μ
PD70F3762
μ
PD70F3770
Flash memory 256 KB 384 KB 512 KB 256 KB Internal
memory
RAM
Note 1
40 KB 48 KB 56 KB 40 KB
Logical space 64 MB Memory
space
External memory area 64 KB
External bus interface Address data bus: 16
Multiplexed bus
General-purpose register 32 bits × 32 registers
Main clock (PLL mode: fX = 3 to 6 MHz, fXX = 24 to 48 MHz (multiplied by 8)
Clock through mode: f
X = 3 to 6 MHz (internal: fXX = 3 to 6 MHz)
Subclock fXT = 32.768 kHz
Internal oscillator fR = 220 kHz (TYP.)
Clock
Minimum instruction
execution time
20.8 ns (main clock (f
XX) = 48 MHz)
I/O port (5 V tolerant) I/O: 77 (22)
16-bit TAA 6 channels (including 1 channel used only for interval function)
16-bit TAB 2 channels
16-bit TMM 4 channels
16-bit TMT 1 channel
Motor control 1 channel (functions with combination of TAA and TAB; includes Hi-Z output control function)
Watch timer 1 channel (RTC)
Timer
WDT 1 channel
Real-time output function 6 bits × 1 channel
10-bit A/D converter 12 channels
8-bit D/A converter 2 channels
CSIF/UARTC 2 channels 2 channels 2 channels 2 channels
CSIF/UARTC/I
2
C 1 channel 1 channel 1 channel 1 channel
CSIF 2 channels 2 channels 2 channels 2 channels
UARTC/I
2
C 2 channels 2 channels 2 channels 1 channel
UARTC/I
2
C/CAN
− − −
1 channel
Serial interface
USB function 1 channel 1 channel 1 channel 1 channel
DMA controller 4 channels (transfer target: on-chip peripheral I/O, internal RAM, external memory)
External
Notes 2, 3
17 (17) 17 (17) 17 (17) 17 (17) Interrupt source
Internal 69 69 69 73
Power save function HALT/IDLE1/IDLE2/STOP/subclock/sub-IDLE mode
Reset source RESET pin input, watchdog timer 2 (WDT2), clock monitor (CLM), low-voltage detector (LVI)
On-chip debugging MINICUBE
®
, MINICUBE2 supported
Operating power supply voltage 2.85 to 3.6 V
Operating ambient temperature −40 to +85°C
Package 100-pin plastic LQFP (fine pitch) (14 × 14 mm)
Notes 1. Including 8 KB of data-only RAM area.
2. The figures in parentheses indicate the number of external interrupts that can release STOP mode.
3. Including NMI.