Datasheet

V850ES/JG3-H, V850ES/JH3-H APPENDIX A DEVELOPMENT TOOLS
R01UH0042EJ0500 Rev.5.00 Page 1454 of 1513
Aug 12, 2011
<5> QB-V850ESJX3H
Note
In-circuit emulator
The in-circuit emulator serves to debug hardware and software when developing
application systems using the V850ES/JG3-H or V850ES/JH3-H. It supports the
integrated debugger ID850QB. This emulator should be used in combination with a
power supply unit and emulation probe. Use the USB interface cable to connect this
emulator to the host machine.
<3> USB interface cable Cable to connect the host machine and the QB-V850ESJX3H.
<4> AC adapter 100 to 240 V can be supported by replacing the AC plug.
<9> QB-100GC-EA-04S
QB-128GF-EA-01S
QB-100GC-EA-05T
QB-128GF-EA-02T
Exchange adapter
Adapter to perform pin conversion.
• QB-100GC-EA-04S: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-EA-01S: 128-pin plastic LQFP (GF-GAT type)
• QB-100GC-EA-05T: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-EA-02T: 128-pin plastic LQFP (GC-GAT type)
<10> QB-100-CA-01S
QB-128-CA-01S
(S type only)
Check pin adapter
Adapter used in waveform monitoring using the oscilloscope, etc.
• QB-100-CA-01S: 100-pin plastic LQFP (GC-UEU type)
• QB-128-CA-01S: 128-pin plastic LQFP (GF-GAT type)
<11> QB-100-SA-01S
QB-144-SA-01S
QB-100GC-YS-01T
QB-128GF-YS-01T
Space adapter
Adapter to adjust the height.
• QB-100-SA-01S: 100-pin plastic LQFP (GC-UEU type)
• QB-144-SA-01S: 128-pin plastic LQFP (GF-GAT type)
• QB-100GC-YS-01T: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-YS-01T: 128-pin plastic LQFP (GF-GAT type)
<12> QB-100GC-YQ-01T
QB-128GF-YQ-01T
(T type only)
YQ connector
Conversion adapter to connect target connector and exchange adapter
• QB-100GC-YQ-01T: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-YQ-01T: 128-pin plastic LQFP (GF-GAT type)
<13> QB-100GC-MA-01S
QB-128GF-MA-01S
QB-100GC-HQ-01T
QB-128GF-HQ-01T
Mount adapter
Adapter to mount the V850ES/JG3-H or V850ES/JH3-H on a socket.
• QB-100GC-MA-01S: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-MA-01S: 128-pin plastic LQFP (GF-GAT type)
• QB-100GC-HQ-01T: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-HQ-01T: 128-pin plastic LQFP (GF-GAT type)
<14> QB-100GC-TC-01S
QB-128GF-TC-01S
QB-100GC-NQ-01T
QB-128GF-NQ-01T
Target connector
Connector to solder on the target system.
• QB-100GC-TC-01S: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-TC-01S: 128-pin plastic LQFP (GF-GAT type)
• QB-100GC-NQ-01T: 100-pin plastic LQFP (GC-UEU type)
• QB-128GF-NQ-01T: 128-pin plastic LQFP (GF-GAT type)
Note The QB-V850ESJX3H is supplied with a power supply unit, USB interface cable, and flash memory programmer
(MINICUBE2). It is also supplied with integrated debugger ID850QB as control software.
Remark The numbers in the angle brackets correspond to the numbers in Figure A-2.