Datasheet

V850ES/JG3-H, V850ES/JH3-H APPENDIX A DEVELOPMENT TOOLS
R01UH0042EJ0500 Rev.5.00 Page 1452 of 1513
Aug 12, 2011
A.4 Debugging Tools (Hardware)
A.4.1 When using IECUBE QB-V850ESJX3H
The system configuration when connecting the QB-V850ESJX3H to the host machine (PC-9821 series, PC/AT
compatible) is shown below. Even if optional products are not prepared, connection is possible.
Figure A-2. System Configuration (When Using QB-V850ESJX3H) (1/2)
<13> Mount adapter
For device mounting
<14> Target connector
For mounting on target system
<9> Exchange adapter
Exchanges pins among different
microcontroller types
<10> Check pin adapter (S type only)
Enables signal monitoring
<11> Space adapter
Each adapter can adjust height by 5.6 mm.
<15> Target system
<7> Extension probe
Flexible type (S and T types)
<13> Mount adapter
For device mounting
<14> Target connector
For mounting on target system
<12> YQ connector
Connector for connecting to emulator
<9> Exchange adapter
Exchanges pins among different
microcontroller types
<11> Space adapter
Each adapter can adjust height by
3.2 mm.
<6> Check pin adapter
Enables signal monitoring (S and T types)
<5> IECUBE
<1>
S-type socket configuration
Optional
Required
<4> Power supply
<2> CD-ROM
<3> USB cable
Simple flash
programmer
<15> Target system
T-type socket configuration
System configuration
Accessories
<8> Extension probe
Coaxial type (S and T types)