Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 31 FLASH MEMORY
R01UH0042EJ0500 Rev.5.00 Page 1371 of 1513
Aug 12, 2011
Table 31-7. Wiring of V850ES/JH3-H Flash Writing Adapters (3/4)
Pin No. Pin Name Recommended Connection
66 P910/SIF3/TXDC2/INTP14/A10
When CSI (CSIF3) is used : connect to SO (output) pin of the
programmer
When CSI (CSIF3) is not used : pull-down
Note
67 P911/SOF3/RXDC2/INTP15/A11
When CSI (CSIF3) is used : connect to SI (input) pin of the
programmer
When CSI (CSIF3) is not used : pull-down
Note
68 P912/SCKF3/A12
When CSI (CSIF3) is used : connect to SCK (output) pin of the
programmer
When CSI (CSIF3) is not used : pull-down
Note
69 P913/TOAB1OFF/INTP16/A13 (HS)
When CSI-HS (CSIF3) is used : connect to H/S (input) pin of the
programmer
When CSI-HS (CSIF3) is not used : pull-down
Note
70 P914/TIAA51/TOAA51/INTP17/A14 -
71 P915/TIAA50/TOAA50/INTP18/A15 -
72 PDH0/A16 -
73 PDH1/A17 -
74 PDH2/A18 -
75 PDH3/A19 -
76 PCT0/WR0 -
77 PCT1/WR1 -
78 PDH4/A20 -
79 PDH5/A21 -
80 PDH6/A22 -
81 PDH7/A23 -
82 VDD Connect to VDD pin of the programmer
83 REGC
Connect the REGC pin to GND via 4.7
μ F (recommended value)
capacitor
84 EVSS Connect to GND pin of the programmer
85 EVDD Connect to VDD pin of the programmer
86 PCM1/CLKOUT -
87 PCT4/RD -
88 PCT6/ASTB -
89 PCM0/WAIT -
90 P60/TOAB1T1/TOAB11/TIAB11 -
91 P61/TOAB1B1/TIAB10/TOAB10 -
92 P62/TOAB1T2/TOAB12/TIAB12 -
93 P63/TOAB1B2/TRGAB1 -
94 P64/TOAB1T3/TOAB13/TIAB13 -
95 P65/TOAB1B3/EVTAB1 Connect to GND pin of the programmer
Note Independently connect to EVSS or VDD via a resistor.