Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 31 FLASH MEMORY
R01UH0042EJ0500 Rev.5.00 Page 1368 of 1513
Aug 12, 2011
Figure 31-6. Wiring Example of V850ES/JG3-H Flash Writing Adapter (In CSIF0 + HS Mode) (2/2)
Notes 1. Corresponding pins when CSIF3 is used.
2. Wire the FLMD1 pin as shown below, or connect it to GND on board via a pull-down resistor.
3. Create an oscillator on the flash writing adapter (shown in broken lines) and supply a clock.
Here is an example of the oscillator.
Example:
X1 X2
4. Corresponding pins when UARTC0 is used.
Caution Do not input a high level to the DRST pin.
Remarks 1. Process the pins not shown in accordance with the handling of unused pins (see 2.3 Pin I/O
Circuit Types, I/O Buffer Power Supplies, and Connection of Unused Pins).
2. This adapter is for the 100-pin plastic LQFP package.