Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 21 USB FUNCTION CONTROLLER (USBF)
R01UH0042EJ0500 Rev.5.00 Page 1178 of 1513
Aug 12, 2011
(2/2)
Bit position Bit name Function
13, 9, 5, 1
RQ1UR3E,
RQ1UR2E,
RQ1UR1E,
RQ1UR0E
Specify the endpoint n (EPn) to be transferred by DMA channel 1.
(n = 1 to 4)
RQ1UR3E RQ1UR2E RQ1UR1E RQ1UR0E EP transferred by DMA2
1 0 0 0 EP4
0 1 0 0 EP3
0 0 1 0 EP2
0 0 0 1 EP1
Other than above
DMA1 does not transfer EPn
(DMA1 not used)
12, 8, 4, 0
RQ0UR3E,
RQ0UR2E,
RQ0UR1E,
RQ0UR0E
Specify the endpoint n (EPn) to be transferred by DMA channel 0.
(n = 1 to 4)
RQ0UR3E RQ0UR2E RQ0UR1E RQ0UR0E EP transferred by DMA0
1 0 0 0 EP4
0 1 0 0 EP3
0 0 1 0 EP2
0 0 0 1 EP1
Other than above
DMA0 does not transfer EPn
(DMA0 not used)
Cautions 1. Setting the same DMA transfer target to multiple DMA channels, and setting multiple DMA
transfer targets to the same DMA channel are prohibited.
2. If using the function of this register, set the DMA trigger factor register (DTFRn (n = 0 to 3)) to
disable DMA requests by interrupt (00H).