Datasheet

V850ES/JG3-H, V850ES/JH3-H CHAPTER 21 USB FUNCTION CONTROLLER (USBF)
R01UH0042EJ0500 Rev.5.00 Page 1086 of 1513
Aug 12, 2011
(7) UF0 SET request register (UF0SET)
This register indicates the target of the automatically processed SET_XXXX (except SET_INTERFACE) request.
This register is read-only, in 8-bit units.
This register is meaningful only when an interrupt request is generated. Each bit is set to 1 after completion of the
status stage, and automatically cleared to 0 when this register is read.
SETCONUF0SET 0
5
00
3
0
2
SETEP
1
0 SETDEV
Address
0020000CH
After reset
00H
0467
Bit position Bit name Function
7 SETCON
This bit indicates that a SET_CONFIGURATION request is received and automatically
processed.
1: Automatically processed
0: Not automatically processed (default value)
2 SETEP
This bit indicates that a SET_FEATURE Endpoint n request (n = 0 to 4, 7) is received and
automatically processed.
1: Automatically processed
0: Not automatically processed (default value)
0 SETDEV
This bit indicates that a SET_FEATURE Device request is received and automatically
processed.
1: Automatically processed
0: Not automatically processed (default value)