Datasheet

V850ES/JG3 APPENDIX A DEVELOPMENT TOOLS
R01UH0015EJ0300 Rev.3.00 Page 807 of 870
Sep 30, 2010
A.4.2 When using MINICUBE QB-V850MINI
(1) On-chip emulation using MINICUBE
The system configuration when connecting MINICUBE to the host machine (PC-9821 series, PC/AT compatible)
is shown below.
Figure A-3. On-Chip Emulation System Configuration
<7>
<6>
<1>
<4><3>
<5>
<2>
STATUS
TARGET
PO
WER
Target system
V850ES/JG3
<1> Host machine PC with USB ports
<2> CD-ROM
Note 1
Contents such as integrated debugger ID850QB, N-Wire Checker, device driver, and
documents are included in CD-ROM. It is supplied with MINICUBE.
<3> USB interface cable USB cable to connect the host machine and MINICUBE. It is supplied with
MINICUBE. The cable length is approximately 2 m.
<4> MINICUBE
On-chip debug emulator
This on-chip debug emulator serves to debug hardware and software when
developing application systems using the V850ES/JG3. It supports integrated
debugger ID850QB.
<5> OCD cable Cable to connect MINICUBE and the target system.
It is supplied with MINICUBE. The cable length is approximately 20 cm.
<6> Connector conversion board
KEL adapter
This conversion board is supplied with MINICUBE.
<7> MINICUBE connector
KEL connector
Note 2
8830E-026-170S (supplied with MINICUBE)
8830E-026-170L (sold separately)
Notes 1. Download the device file from the Renesas Electronics website.
http://www2.renesas.com/micro/ja/ods/index.html
2. Product of KEL Corporation
Remark The numbers in the angular brackets correspond to the numbers in Figure A-3.