Datasheet

V850ES/JG3 APPENDIX A DEVELOPMENT TOOLS
R01UH0015EJ0300 Rev.3.00 Page 806 of 870
Sep 30, 2010
Figure A-2. System Configuration (When Using QB-V850ESSX2) (2/2)
Notes 1. Download the device file from the Renesas Electronics website.
http://www2.renesas.com/micro/ja/ods/index.html
2. Under development
3. Supplied with the device depending on the ordering number.
• When QB-V850ESSX2-ZZZ is ordered
The exchange adapter and the target connector are not supplied.
• When QB-V850ESSX2-S100GC is ordered
The QB-100GC-EA-01S and QB-100GC-TC-01S are supplied.
• When QB-V850ESSX2-T100GC is ordered
The QB-100GC-EA-01T, QB-100GC-YQ-01T, and QB-100GC-NQ-01T are supplied.
4. When using both <9> and <10>, the order between <9> and <10> is not cared.
<5> QB-V850ESSX2
Note
In-circuit emulator
The in-circuit emulator serves to debug hardware and software when developing
application systems using the V850ES/JG3. It supports to the integrated debugger
ID850QB. This emulator should be used in combination with a power supply unit and
emulation probe. Use the USB interface cable to connect this emulator to the host
machine.
<3> USB interface cable Cable to connect the host machine and the QB-V850ESSX2.
<4> AC adapter 100 to 240 V can be supported by replacing the AC plug.
<8> QB-100GC-EA-01S
QB-100GC-EA-01T
Exchange adapter
Adapter to perform pin conversion.
<9> QB-100-CA-01S
Check pin adapter
Adapter used in waveform monitoring using the oscilloscope, etc.
<10> QB-100-SA-01S
QB-100GC-YS-01T
Space adapter
Adapter to adjust the height.
<11> QB-100GC-YQ-01T
YQ connector
Conversion adapter to connect the target connector and the exchange adapter.
<12> QB-100GC-MA-01S
QB-100GC-HQ-01T
Mount adapter
Adapter to mount the V850ES/JG3 with socket.
<13> QB-100GC-TC-01S
QB-100GC-NQ-01T
Target connector
Connector to solder on the target system.
Note The QB-V850ESSX2 is supplied with a power supply unit, USB interface cable, and simple programmer. It is
also supplied with integrated debugger ID850QB as control software.
Remark The numbers in the angle brackets correspond to the numbers in Figure A-2.