Datasheet

V850ES/JG3 APPENDIX A DEVELOPMENT TOOLS
R01UH0015EJ0300 Rev.3.00 Page 805 of 870
Sep 30, 2010
A.4 Debugging Tools (Hardware)
A.4.1 When using IECUBE QB-V850ESSX2
The system configuration when connecting the QB-V850ESSX2 to the host machine (PC-9821 series, PC/AT
compatible) is shown below. Even if optional products are not prepared, connection is possible.
Figure A-2. System Configuration (When Using QB-V850ESSX2) (1/2)
<12> Mount adapter
For device mounting
<13> Target connector
For mounting on target system
<8> Exchange adapter
Exchanges pins among different microcontroller types
<9> Check pin adapter (S type only)
Enables signal monitoring
<10> Space adapter
Each adapter can adjust height by 5.6 mm.
<14> Target system
<7> Extension probe
Probe can be connected (S and T types)
<12> Mount adapter
For device mounting
<13> Target connector
For mounting on target system
<11> YQ connector
Connector for connecting to emulator
<8> Exchange adapter
Exchanges pins among different microcontroller types
<10> Space adapter
Each adapter can adjust height by 3.2 mm.
<6> Check pin adapter (under development)
Enables signal monitoring (S and T types)
<5> IECUBE
<1>
S-type socket
configuration
Optional
Required
<4> Power
supply
<2> CD-ROM
<3> USB cable
Simple flash
programmer
<14> Target system
T-type socket
configuration
System configuration
Accessories
<1> Host machine (PC-9821 series, IBM-PC/AT compatibles)
<2> Debugger, USB driver, manuals, etc. (ID850QB Disk, Accessory Disk
Note 1
)
<3> USB interface cable
<4> AC adapter
<5> In-circuit emulator (QB-V850ESSX2)
<6> Check pin adapter (S and T types) (QB-144-CA-01
Note 2
) (optional)
<7> Extension probe (S and T types) (QB-144-EP-01S) (optional)
<8> Exchange adapter
Note 3
(S type: QB-100GC-EA-01S, T type: QB-100GC-EA-01T)
<9> Check pin adapter
Note 4
(S type only) (QB-100-CA-01S) (optional)
<10> Space adapter
Note 4
(S type: QB-100-SA-01S, T type: QB-100GC-YS-01T) (optional)
<11> YQ connector
Note 3
(T type only) (QB-100GC-YQ-01T)
<12> Mount adapter (S type: QB-100GC-MA-01S, T type: QB-100GC-HQ-01T) (optional)
<13> Target connector
Note 3
(S type: QB-100GC-TC-01S, T type: QB-100GC-NQ-01T)
<14> Target system